Trenchless Sewer Repair

Trenchless Sewer Repair Aurora eliminates the need for invasive excavation. It uses methods like pipe lining and pipe bursting to fix your damaged pipes without destroying your landscaping or disrupting your home life.

Sewer Repair

Both methods use epoxy-coated sleeves that are inserted into your current pipes. Both options offer a longer lifespan than your old sewer pipes.

One of the most common and effective trenchless methods of sewer line repair involves lining rather than completely replacing old pipes. In this method, called pipe lining or cured in place pipe (CIPP), plumbers insert a liner into your existing sewer drain and fill it with resin, creating a brand new pipe inside your old one. This effectively solves issues with your old pipes like holes, cracks, channeling, age deterioration, and root intrusion. It also provides a solid, structurally sound, corrosion-resistant pipe within your old one, which prevents future problems.

To perform the process, first, a plumber will hydro and mechanically clean out your drain lines to remove any clogs. Once the clogs are cleared, the plumber will dig two access points for the project, one at each end of your existing pipe. Then, the liners will be inserted into each segment of damaged pipe. During this step, technicians will measure, mix, and impregnate the liner with resin to prepare it for insertion. After the liner is inserted, it will be inflated with a special tool to adhere to the walls of your old pipe and create an airtight seal.

After the liner has been inserted, it will undergo a curing process, which typically lasts about 30 hours, before being trimmed and tested. This will ensure the CIPP liner is properly placed, cured, and sealed to the old pipe. Once the lining has cured, it will be ready for use. This method is less expensive than full pipe replacement, and can be used to solve many of the same problems. It also requires less time to complete and causes much less damage to your property.

Pipe Bursting

Pipe bursting is one of the oldest and most reliable trenchless methods for replacing sewer lines. It involves mechanically pulling a new pipe through an existing one, causing it to burst apart as it goes. This method is also known as a “mechanical trenchless sewer replacement” and is ideal for replacing large sections of your aging sewage system.

Before a plumber performs this process, they’ll use a video inspection to locate the source of your sewage line problems. They’ll then dig two small holes at the start and end of the sewer line that needs to be replaced. A cable is fed into these holes and hydraulically pulled to deploy a cone-shaped “bursting head” that breaks apart your old pipes as it’s pulled behind a new, seamless high-density polyethylene (HDPE) pipe.

While this is a very effective trenchless solution for repairing your sewer line, it’s not the right option for every situation. For example, this method cannot be used for smaller pipes or if your sewer line has multiple connections. In these cases, another trenchless technique, like cured-in-place pipe (CIPP) lining, may be more appropriate.

It’s also important to make sure there aren’t other pipes or underground wiring related to local utilities that can get in the way of this trenchless sewer repair method. It’s also crucial that you check the severity of your sewer line break. Large wet areas on your property indicate a serious problem that should be addressed immediately. This may require a full excavation of the affected area before the trenchless sewer repair can be completed. Afterward, the licensed plumber will heat weld your new pipes in place above ground to ensure they’re long-lasting and durable.

No Digging

Sewer and drain lines are an essential part of any urban environment, helping to ensure the proper disposal of wastewater. However, over time, these pipes can become corroded or clogged and need to be repaired. Thankfully, advances in technology have made it possible to repair these lines without the need for extensive excavation. Trenchless sewer repair techniques like pipe bursting and relining can provide a long-lasting solution to damaged pipes that is less invasive than traditional dig methods.

One of the biggest benefits of trenchless sewer repair is that it has a much smaller environmental impact than traditional excavation. Traditional dig methods often involve tearing up sidewalks, driveways, gardens, and other outdoor features to access the sewer line. However, trenchless methods only require a few small access points to reach the pipe. This means that your landscaping and outdoor spaces remain intact, and you don’t have to spend extra money putting your yard back together after the work is done.

There are several different types of trenchless sewer repair, but the most common involves using a plastic slip liner to seal leaks in the pipes. This method requires two small holes to be dug, but it is a much more streamlined process than digging large trenches across your property.

Another popular option is pipe bursting, which uses a hydraulic head to break apart the old sewer line and immediately replace it with a new pipeline. This technique is more comprehensive than relining and works well for pipes that are too corroded or narrow to be repaired with a lining.

Longevity

Trenchless repairs are quick and non-invasive, so you don’t have to spend a lot of time waiting for your property to be back in use. Traditional excavation methods can disrupt local traffic and lead to a delay of business, while trenchless solutions minimize downtime by allowing you to continue with your daily routines while the work is being done.

The longevity of your new sewer line is another benefit of choosing trenchless repair services. The cured-in-place pipe, or CIPP, that is installed during a trenchless sewer repair, has a 50-year lifespan and offers many advantages over traditional pipe materials. For example, the CIPP pipe prevents off-set pipes and cracks, which can cause clogs in the future. It also helps to improve your pipe flow capacity and reduces tree root invasions that can damage your line over time.

During the trenchless pipe lining process, a resin-coated tube is inserted into your existing sewage line and inflated or cured in place. The resulting lining can seal cracks, leaks, and fractures, while also reinforcing your old pipe for improved structural integrity. This method is especially helpful if you’re looking to update your older, rusty sewer line with a more durable and efficient replacement.

During the trenchless pipe bursting process, a local service provider will create access holes at both ends of your sewage line to begin the repair. Then, a cone-shaped device with a new flexible sewage pipe attached will be pushed through the old line from one end to the other. The old sewage pipe will be broken up and replaced with the new, flexible liner, which will take up its former space right away. This approach is effective for repairing or replacing large sections of damaged or deteriorating sewer lines and can help to upsize your existing system with little disruption to your home or business.

Environmentally Friendly

Sewer and drain systems are essential parts of your home or business that allow for the safe removal of waste. However, they can get damaged due to a number of reasons including age deterioration, roots, and blockages. While traditional excavation methods are necessary for sewer line repair and replacement, trenchless technologies offer a non-invasive alternative that is both environmentally friendly and affordable.

Trenchless techniques rely on a camera inspection to locate sewer line issues, rather than digging an entire yard and tearing up driveways and sidewalks. Because of this, they are less invasive to landscaping and require much less time for completion.

One of the most significant benefits of trenchless sewer repair is that it reduces waste. Traditional excavation methods generate a great deal of debris in the form of dirt, broken pipes, and other materials that must be transported to landfills. Trenchless repairs involve rehabilitating existing pipes rather than replacing them entirely, which eliminates the need for new materials and reduces environmental degradation.

Additionally, trenchless methods for locating and repairing sewer lines require only two access points at either end of the affected pipe. These holes are smaller than the typical excavation hole, which further reduces surface disruption and damage to your property.

The two most common trenchless techniques for addressing sewer line problems are cured-in-place pipe (CIPP) lining and pipe bursting. CIPP lining involves inserting a flexible tube coated with resin into the old pipe and inflating it to create a new pipe within the original pipe. UV light can also be used to cure the resin coating, providing a more energy-efficient solution.

Both of these techniques are a good option for addressing cracks, leaks, and other minor problems with your sewer lines. They can help you avoid costly repair bills and keep your home or business running smoothly for years to come.